Enquiry and requirements
You describe the rooms, the walls involved, and the general look you want.
Sankagiri · Tiruchengode
Interior finishes, measured and installed.
AMAIVU supplies and installs wallpapers, false ceilings, blinds, curtains, flooring, floor mats, mosquito nets, ACP and wooden flooring. Tell Praveen what you need and where the work is.
- One standard roll
- 10.05 m × 53 cm
- Measured before ordering
- Every wall, every opening
- Bought as one batch
- Same lot number
What we do
One contact for a range of interior finishes.
Ask about a single service or combine several for the same space. Praveen can discuss the work, location and preparation with you.
False ceiling
Blinds
Curtains
Flooring
Floor mats
Mosquito nets
ACP
Wooden flooring
Preparation and availability depend on the site and work.
Praveen has 13 years of experience in this work.
Service regions
Sankagiri, Tiruchengode
Salem, Namakkal, Erode, Tiruchirappalli, Coimbatore, Tiruppur, Karur. Coverage depends on the work. Please confirm your location and scope.
How a job runs
Five steps, and you know what happens at each one.
Nothing here is a surprise. You can read the whole sequence, including what you need to decide and when.
Site visit and measurement
A visit to measure wall height and width, and to note switches, doors, and any damp patches.
Design selection and sample check
You review material and pattern options against your room's light and size.
Worth knowing
Things that decide the outcome.
Standard roll size
Common widths are roughly 53 cm or 90 to 100 cm, with lengths often around 10 m
Roll width and length decide how many rolls a wall needs and where seams fall. Sizes vary by manufacturer.
Pattern repeat
The vertical distance before a printed pattern repeats, commonly 0 to 64 cm
A larger repeat means more trimming waste, so a wall can need more rolls for the same visible area.
Same batch or lot number
All rolls used on one wall run should share one batch or lot number
Dye can vary slightly between production batches, which can show as a visible colour shift between rolls.
New plaster curing time
Often 4 to 8 weeks before papering, depending on climate and wall thickness
Papering over damp plaster traps moisture underneath and can cause the paper to lift or grow mould.
Paste the wall vs paste the paper
Two different application methods, set by the product, not chosen freely by the installer
Using the method meant for a different material can cause weak adhesion or a shorter working life.
Colour show-through
A dark or strongly coloured wall can show through a light or thin paper
A light-coloured primer coat evens this out before hanging, especially under pale wallpaper.
Choosing a material
Non-woven, vinyl, grasscloth — they behave differently.
Heat, humidity and direct sunlight change what will last on your wall. The guide covers what each material is, where it works, and where it does not.
Non-woven
A sheet made from pressed natural and synthetic fibres, not from paper pulp alone.
Vinyl wallcovering
A vinyl face on a paper, non-woven or fabric backing; texture and construction vary by product.
Heavyweight vinyl wallcovering
A heavier vinyl wallcovering whose backing, construction and hanging method depend on the product sheet.
Before you ask for a quote
Work out roughly how much you need.
Put in your room size and how many doors and windows are on the walls you want papered. You get the wall area and an approximate roll count, calculated in your browser. Nothing is sent anywhere.
For architects, engineers and designers
The detail behind the drawing.
Design codes, roll dimensions, repeat and match type for take-offs, substrate tolerances, and where surfaces sit in the site sequence.
About this site
Designs in the catalogue are visual concepts to help explain style and pattern. Contact AMAIVU to discuss available materials and your project.